How to realize High Voltage FOC Motor Control including Power Factor Correction with Infineon’s iMOTION™ Controllers and CIPOS™ IPMs

Datum: 09.06.2017 | Views: 17 | Länge: 1:00:14
Danke für Ihre Bewertung
Motor control application designers are under pressure today from the markets, competitors and regulators to optimize the performance and efficiency of their systems, while keeping the costs of the electronics systems at a minimum. Applications ranging from pumps, fans and compressors in home appliances to drones and e-bikes require sophisticated control systems able to respond reliably to dynamic loads and rapid changes in motor speed while keeping the efficiency at the highest possible level. At the same time they must meet other application requirements, such as, for example, low acoustic noise or power factor correction (PFC) control. All these challenges need to be addressed and at the same time meet the tough deadlines in order not to miss the market window.

To help designers master these challenges and relieve the burden of complex software and hardware design, Infineon's broad portfolio is offering full solution for these types of systems, based on iMOTION™ motion control ICs and CIPOS™ Intelligent Power Modules (IPM). This webinar will present Infineon's solution to complex and compact FOC systems designs.

It will start off with high-level system design description, followed by an overview of the iMOTION motor control IC portfolio and its target application, with some insights into next generation iMOTION 2.0 devices.

After that, PFC related CIPOS™ IPMs will be presented focusing on benefits from product and how to use it from the hardware design point of view. This will be useful to system designers.

Finally, the newly released iMOTION™ Modular Application Development Kit (MADK) platform will be showcased as a scalable platform for rapid development, enabling customers to mix-and-match different controller and power board options to best meet their application needs.

Automotive Power MOSFETs
Länge: 6:01
Datum: 15.12.2011 | Views: 1050933

Automotive Power MOSFETs

Based on the combination of innovative packaging technology and Infineon’s thin wafer process technology, the new 40V OptiMOS™ T2 power MOSFETs offer best-in- class specifications. Infineon uses a diffusion soldering die attach approach to produce dedicated products in TO263, TO220 and TO262. Four OptiMOS™ T2 products in these packages are ready for production: the IPB160N04S4-02D (with 160A in a TO263 package), the IPB100N04S4-02D (with 100A in TO263) and the IPP/I100N04S4-03D (with 100A in TO220 and TO262). With those products, Infineon exceeds current RoHS (Restriction on Hazardous Substances) directives related to lead-based solder used to attach silicon chips to packages. Stricter ELV RoHS directives pending implementation after 2014 may require 100% lead-free packaging. The new Infineon devices allow customers to meet these stricter requirements.


Based on the combination of innovative packaging technology and Infineon’s thin wafer process technology, the new 40V OptiMOS™ T2 power MOSFETs offer best-in- class specifications. Infineon uses a diffusion soldering die attach approach to produce dedicated products in TO263, TO220 and TO262. Four OptiMOS™ T2 products in these packages are ready for production: the IPB160N04S4-02D (with 160A in a TO263 package), the IPB100N04S4-02D (with 100A in TO263) and the IPP/I100N04S4-03D (with 100A in TO220 and TO262). With those products, Infineon exceeds current RoHS (Restriction on Hazardous Substances) directives related to lead-based solder used to attach silicon chips to packages. Stricter ELV RoHS directives pending implementation after 2014 may require 100% lead-free packaging. The new Infineon devices allow customers to meet these stricter requirements.


Introducing the New CoolMOS™ C7 Series
Länge: 5:57
Datum: 29.04.2013 | Views: 952831

Introducing the New CoolMOS™ C7 Series

Infineon’s new CoolMOS™ C7 series is a revolutionary step forward in technology, providing the worlds’s lowest RDS(on) per package and, thanks to its low switching losses, efficiency improvements over the full load range. C7 is optimized for hard switching topologies such as Power Factor Correction (CCM PFC), Two Transistor Forward (TTF) and Solar Boost in applications such as Solar, Server, Telecom and UPS. The 650V breakdown voltage makes it suitable for both Solar and Switched Mode Power Supplies (SMPS) PFC stages where extra safety margin is required.
Infineon’s new CoolMOS™ C7 series is a revolutionary step forward in technology, providing the worlds’s lowest RDS(on) per package and, thanks to its low switching losses, efficiency improvements over the full load range. C7 is optimized for hard switching topologies such as Power Factor Correction (CCM PFC), Two Transistor Forward (TTF) and Solar Boost in applications such as Solar, Server, Telecom and UPS. The 650V breakdown voltage makes it suitable for both Solar and Switched Mode Power Supplies (SMPS) PFC stages where extra safety margin is required.
Switch Mode Power Supplies (LAB Session)
Länge: 3:42
Datum: 15.06.2012 | Views: 943092

Switch Mode Power Supplies (LAB Session)

 This Lab Session features a ZVS (Zero Voltage Switching) phaseshift topology, a very important application of Infineon`s CoolMOS™ and OptiMOS™ families, which is widely used in high performance DC/DC converter stages, server and telecom SMPS . Infineon experts are showing details of this topology, which integrates a CoolMOS™ CFD2 and an OptiMOS™ device, and thus achieves Zero Voltage Switching at very load light load.
 This Lab Session features a ZVS (Zero Voltage Switching) phaseshift topology, a very important application of Infineon`s CoolMOS™ and OptiMOS™ families, which is widely used in high performance DC/DC converter stages, server and telecom SMPS . Infineon experts are showing details of this topology, which integrates a CoolMOS™ CFD2 and an OptiMOS™ device, and thus achieves Zero Voltage Switching at very load light load.
Efficiency in Switch Mode Power Supplies  (SMPS)
Länge: 6:32
Datum: 11.06.2012 | Views: 827320

Efficiency in Switch Mode Power Supplies (SMPS)

Efficient energy conversion is vital for an environmentally-friendly electricity support. Infineon’s SMPS products are consequently optimized for the requirements of the next generation of highest efficient solutions and enable systems with best price/performance ratio for applications such as data centers, where energy efficiency becomes a more and more important factor.
Efficient energy conversion is vital for an environmentally-friendly electricity support. Infineon’s SMPS products are consequently optimized for the requirements of the next generation of highest efficient solutions and enable systems with best price/performance ratio for applications such as data centers, where energy efficiency becomes a more and more important factor.
Efficienza negli Alimentatori Switching (SMPS)
Länge: 6:44
Datum: 13.06.2012 | Views: 751608

Efficienza negli Alimentatori Switching (SMPS)

 L’efficienza nella conversione dell’energia è vitale per un una gestione eco-compatibile dell’elettricità. I prodotti di Infineon per SMPS sono conseguentemente ottimizzati per soddisfare le richieste della prossima generazione di soluzioni a più alta efficienza e per realizzare sistemi con il miglior rapporto prezzo/prestazioni per applicazioni come i data center, dove l’efficienza energetica diventa un fattore sempre più importante.
 L’efficienza nella conversione dell’energia è vitale per un una gestione eco-compatibile dell’elettricità. I prodotti di Infineon per SMPS sono conseguentemente ottimizzati per soddisfare le richieste della prossima generazione di soluzioni a più alta efficienza e per realizzare sistemi con il miglior rapporto prezzo/prestazioni per applicazioni come i data center, dove l’efficienza energetica diventa un fattore sempre più importante.